Product Code: LXA – 303 Product Code: LXA – 306
The iluxusdesign 3/6 output modules is an extension device of KNX EOZ Touch Panel. It is like a gateway between EOZ and ON/OFF modules. With 3 or 6 outputs, up to 3 or 6 ON/OFF devices can be controlled over EOZ. It supports up to 5A load current. Also, with up to AC 277V voltage input, the device has wide range of voltage switching capacity.
Product Characteristics
- 3 or 6 ON/OFF outputs
- Wide range of voltage switching capacity (up to AC 277V)
- Up to 5A load current
- 0.205-1.31 mm2 solid wire or stranded wire cable connections
- Production in Türkiye, certified to ISO 9001
- 2 years warranty
Please Read Carefully Before First Use
- Electrical equipment must be installed and suited only by qualified electricians
- Observe the current accident prevention regulations.
- Failure to observe any of the installation instructions may cause damage to the device and result in fire and other hazards.
- Before working on the device or before replacing any connected loads,disconnect the supply voltage (by cutting out the circuit breaker) to avoid the risk of an electric shock.
- Make sure during the installation that there is always sufficient insulation between the mains voltage and the bus.
- Do not open the device and do not use it outside the scope of the technical specifications.
Connection Diagram
Scale Drawing
Technical Data
| Type of protection | IP 20 | EN 60529 |
| Safety class | ıı | EN 61140 |
| Models | 3-Output | LXA-303-000 |
| 6-Output | LXA-306-000 | |
| Product Detail | 3-Output Module | |
| 6-Output Module | ||
| Power Supply | - | |
| Mounting | EOZ Mounting Box | |
| Output | Switching voltage | 230 VAC @ 50-60 Hz |
| Switching capacity @250VAC | 5A | |
| Output Connection | Wire Range | 0.205 - 1.31 mm2 solid |
| 0.205 - 1.31 mm2 stranded | ||
| Max. Torque | 0,20 Nm | |
| Temperature Range | Operation | (-5…+45) |
| Storage | (-20…+70) | |
| Humidity | Maximum air humidity | %85 no moisture consendation |
| Flammability | Non-flammable product | |
| Dimensions | L:45mm W:72,5mm H:23mm | |
| Weight | LXA-303-000 | 46gr |
| LXA-306-000 | 74gr | |
| Certification | CE |
EOZ 3&6 KNX Output Extention Modul Product Photo