KNX Mix Switch Actuator 16-24 Output
Product Code: LXA-116-16A Product Code: LXA-124-16A
iluxus Design KNX Mix Switching Actuator meets all automation requirements in a smart building in order to meet greater comfort, security, and efficiency in living spaces, residences and commercial applications. Mix Actuator used in lighting, blinds, shutter, air conditioning, etc. It is a versatile device that allows a variety of configurations. 16 outputs (LXA-116-16A) and 24 outputs (LXA-124-16A) switching. Each channel can support a load up to 16A C characteristic and AC 230V. AC and DC shutter blind motors can be controlled and emergency scenarios can be defined. It provides solutions to different demands in projects with its scenario, logic, and data converter functions.
Outputs can be controlled manually by the manual buttons on the device. Each channel status is shown by each status led on the module instantly. Mix Switching Actuators are powered by the KNX BUS and can be programmed via ETS software.
Product Code: LXA-116-16A
Product Code: LXA-124-16A
KNX Mix Switch Actuator Product Characteristics
- 16 Output channels for LXA-116-16A
- 20 Output channels for LXA-124-16A
- Lighting functions
- Heating valves functions
- Shutter / Blind functions (AC 230V and DC 24V motor control)
- Wind / Rain / Frost Alarm functions for Blind / Shutter outputs
- Fan coil functions for 2 pipes and 4 pipes systems
- Room Controller Unit, Hvac operations
- Data type converter operations(1Bit / 2Bit / 1Byte / 2Byte)
- Logic and central controlling functions.
- Operation as NO or NC contacts per ETS configurable
- Switching feedback (only in bus operation)
- Outputs have a stable relay which allows keeping the last state.
- Timing functions: switch-on delay and off delay and staircase, lighting function
- Integration into the light and blind / shutter scenes
- Operating hours counter function, configurable via bus
- Certified according to KNX
- 2 years warranty
KNX Mix Switch Actuator Connection Diagram
PROGRAMMING:
Press “Prog” button on the module. When pressed the Prog Led will be activated.
MANUAL CONTROL:
All outputs can be controlled by each output manual buttons. When a output button is pressed, the related output will be opened and/or closed according the pressing sequence. Then the output channel led will be activated.
KNX Mix Switch Actuator Scale Drawing
Technical Data
| Type of protection | IP 20 | EN 60529 |
| Safety class | ıı | EN 60664 |
| Models | 16 Gang | LXA-116-16A |
| 24 Gang | LXA-124-16A | |
| Product Detail | Mix Actuators | |
| Power Supply | Voltage | KNX Bus System |
| Current Consumption | <10mA | |
| Width Inspace Unit | 10 Module (1 Module = 18 mm) | |
| Operating Mode | KNX Bus System | |
| Output Connections | Conductor Cross Section | 0,25 - 6 mm² single core |
| 0,25 - 4 mm² stranded | ||
| 0,25 - 2,5 mm² stranded, with ferrule without plastic sleeve | ||
| 0,25 - 4 mm² stranded, with ferrule with plastic sleeve | ||
| Max. torque | 0.5 Nm | |
| KNX Bus connection terminal | 0,8 mm² Ø, solid core | |
| Output | Number | 16 |
| 24 | ||
| Switching voltage | AC 230V; @50/60 Hz | |
| Switching capacity AC 250V | 16A, 105A Inrush | |
| Maximum switching voltage | 400V AC | |
| Maximum switching power | 6400 VA | |
| Limiting making current (Inrush) | 165A (Maximum 20ms Incand. Lamps) | |
| 800A (Maximum 200µs) | ||
| Coil Type | Latching, single coil | |
| Contact Form | SPST-NO (1 Form A) | |
| Contact Rating (Current) | 16A | |
| Temperature range | Operation | -5°C / +45°C |
| Storage | -20°C / +70°C | |
| Humidity | Maximum air humidity | 85% no moisture consendation |
| Flammability | Non-flammable product | |
| Dimensions | L:67 x W:180 x H:90 mm | |
| Weight | LXA-116-16A | 485 gr |
| LXA-124-16A | 645 gr | |
| Certification | KNX Certified | |
| Warranty | 2 Year |