Product Code: LXA-164-30V
The iluxusdesign KNX power supply generates a voltage of DC 30V and has an additional auxiliary voltage output. The integrated throttle decouples the KNX bus line from the 30 V DC auxiliary voltage. Both outputs are overload and short circuit proof. Any desired load distribution across the outputs is possible up to a maximum of 640 mA. The LED status shows the device status and overload. Resetting is done by pressing RESET button on the front of the device.
Product Characteristics
- 640 mA output current
- Operating AC 150V – 275V @50-60 Hz
- 2 Power Outputs: Output 1: Integrated KNX Choke (DC 30V, SELV) Output 2: External Auxiliary Supply Output (30V, SELV)
- Short Circuit Protection for both outputs
- Overload Protection for both outputs
- 3 LED Indicators:
Left LED (Green): Power
Middle LED (Red): Overload or Short Circuit (Iout > 900 mA, LED is ON; Otherwise, LED is OFF)
Right LED (Red): Reset
Please Read Carefully Before First Use
- The device may only be installed and put into operation by a qualified electrician or authorized personnel
- For planning and construction of electric installations the corresponding specifications, guidelines and regulations that must be observed in the respective country
- For mounting use an appropriate equipment according to IEC60715
- Installation only in distribution boards and enclosed housings
- Installation only on a 35 mm DIN rail (Th35)
- Contact protection must be provided through the control cabinet
- Connect the KNX bus line as for common KNX bus connections with a KNX TP bus cable, to be stripped and plugged into a KNX TP connector
- Do not damage electrical insulations when connecting
- The housing must not be opened
- Protect the device from moisture, dirt and damage
- The device needs no maintenance
- In the case of damage no repairs may be carried out by unauthorized personnel
Connection Diagram
Scale Drawing
Technical Data
| Type of protection | IP 20 | EN 60529 |
| Safety class | ıı | EN 60664 |
| Power Supply | Mains Voltage | AC 230V ±15 % @ 50 Hz |
| Leakage Loss (Open Circuit) | 1,2 W | |
| Leakage Loss (Normal) | 3,4 W | |
| Power Consumption (Normal) | 23 W | |
| Power Consumption (Max. Overload) | 42 W | |
| Power Output | KNX Output Voltage | 28 ... 31 VDC (SELV) |
| AUX Output Voltage | 28 ... 31 VDC (SELV) | |
| Rated Current | 640 mA | |
| Maximum Current (Total Output) | 1,2 A | |
| Mains failure bridging time | > 100 ms | |
| Efficiency at nominal load | 81 % | |
| With in Space Unit | 4 Modules (1 Module = 18 mm) | |
| Connections | Screw Terminals | 0,3 - 2,5 mm² |
| Max. Torque | 0,4 Nm | |
| KNX Connection Bus Terminal | 0,8 mm² Ø, solid core |
|
| Installation | 35mm DIN Rail | |
| Operating Element | Reset Button | Reset at the EIB/KNX Output |
| Left LED (Green) | Output Voltage is OK | |
| Middle LED (Red) | Overload or Short Circuit | |
| Right LED (Red) | Reset | |
| Temperature Range | Operation | (-5°C ... +45°C) |
| Storage | (-20°C ... +70°C) | |
| Humidity | Maximum air humidity | 5% ... 93% (non consendation) |
| Flammability | Non-flammable product | |
| Dimensions | L:70 W:90 H:65 mm | |
| Weight | 206 gr | |
| Standarts | EN50491-5-1 / -2 / -3, EN50581 | |
| EN61000-6-2 / -3 | ||
| EN61558-1 / -2-6 | ||
| Certification | KNX Certified |
KNX Power Supply Product Photo